Rust Grip

Asbestos & Lead Paint Encapsulation

Before
After

TAP TO CALL +818 696 3786

Rust Grip Advantages

Single Component – No mixing part A & B
Fast Cure – Humidity Accelerates Curing
Surface Tolerant – Minimal Surface Preparation
Easy To Apply – Brush, Roll or Spray
Strength – Made with Aluminum
Self-Priming – Primer, Mid & Top Coat All In One
Long Shelf and Pot Life – 3 Years If Unopened

Case Studies

Chevron USA
Published in The Society of Petroleum Engineers

Chevron - Published in The Society of Petroleum Engineers

Rust Grip declared the best exterior drill pipe coating
after 8 years of testing

Rust Grip declared the best exterior drill pipe coating after 8 years of testing

Blue Chip Casino Boat – Boyd Gaming – Michigan City USA

Blue Chip Casino Boat
Boyd Gaming – Michigan City USA

Saved $2,000,000 by using Rust Grip instead of sand blasting

Kentucky Bridge Application

22 year Re-Inspection/Observation Report

Lab Testing

ASTM B117 – Salt Spray Test @ 6 mils DFT

15,000 hours - Perfect 10 out of 10

ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT

10,000 hours - Perfect 10 out of 10
‍
Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.

Table 1. Ratings of the Coupons After 1,000, 5,000, and 10,000 Hours of Exposure
Exposure Time (Hours)	Rating of the Three Coupons as Per ASTM D610-08	Notes
1,000	10, 10, and 10	Up to 0.03 percent rusting on the coupons with rust grade 9-P, and up to 0.01 percent rusting on the coupons with rust grade 10
5,000	9-P, 10, and 10
10,000	9-P, 10, and 10

TAP TO CALL +818 696 3786

Before
After

US PATENT 5,695,812

Certifications

Made in USA

Technical Data

Description

RUST GRIP is a tough, single component moisture cure polyurethane coating, loaded with metallic pigments for additional strength. In most cases, a white or near white blasting is not required. RUST GRIP is designed to resist chemical solvents and acid splashes; it can be used as a primer or a one coating system.

Application

RUST GRIP can be applied to metal, concrete, masonry and wood. Application can be by airless sprayer or brush/roller. Application thickness depends on surface profile.

Physical Data

Solids: By Weight 62.2% / By Volume 51.4%
Cures by absorbing moisture from in the air
Weight: 9.4 lbs per gallon
Shelf life: 3 years if unopened under normal conditions
Resistant to most solvents, chemicals, and some acids
VOC Level: 380 grams/liter
Max. Surface Temp. when applying: 150°F
Min. Surface Temp. when applying 50°F
Max. Surface Temp. after curing: 325°F

Purchase Rust Grip
Or Request Information

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Fast Overcoat Window Time
Relative Humidity	90°F	70°F	50°F
90%	1 hr	1.5 hr	2-3 hr
80%	1 hr	1.5 hr	2-3 hr
60%	1.5 hr	1.5-2 hr	3-4 hr
40%	1-2 hr	2-4 hr	6-8 hr
30%	2-3 hr	3-6 hr	10-14 hr
20%	6 hr	8-10 hr	12-16 hr
10%	12 hr	12-18 hr	18-24 hr

Rust Grip Spread Rate Calculator

Surface Area

Total Surface Area:	0
Rust Grip Gallon Needed:	0
Spread Rate per Gallon:	90 ft
(Includes 10% waste and spillage)

Surface Area

Total Surface Area:	0
Rust Grip Gallon Needed:	0
Spread Rate per Gallon:	61.2 ft
(Includes 10% waste and spillage)

ASTM B117 – Salt Spray Test @ 6 mils DFT

15,000 hours - Perfect 10 out of 10

ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT

10,000 hours - Perfect 10 out of 10
‍
Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.

Table 1. Ratings of the Coupons After 1,000, 5,000, and 10,000 Hours of Exposure
Exposure Time (Hours)	Rating of the Three Coupons as Per ASTM D610-08	Notes
1,000	10, 10, and 10	Up to 0.03 percent rusting on the coupons with rust grade 9-P, and up to 0.01 percent rusting on the coupons with rust grade 10
5,000	9-P, 10, and 10
10,000	9-P, 10, and 10

Asbestos & Lead Paint Encapsulation: Safe Solutions for Hazardous Materials

Asbestos and lead-based paint are two hazardous materials that are commonly found in older
buildings. Exposure to asbestos and lead can cause serious health issues, including lung
cancer, mesothelioma, and lead poisoning.
‍
Liquid Encapsulation is a process that safely seals these materials, preventing them from
releasing hazardous fibers into the air. In this article, we'll discuss a simple and straight forward
solution using Rust Grip® to encapsulate lead-based paint, asbestos, or other hazardous
materials, without the need for sandblasting or containment.

One-Coat Paint System Encapsulates Lead-Based Paint and
Eliminates Sandblasting

Sandblasting is a common method for removing lead-based paint and asbestos from surfaces.
However, it can be dangerous for workers and can release hazardous fibers into the air. Our
one-coat paint system provides a safe and effective alternative to sandblasting. It encapsulateslead-based paint and asbestos, eliminating the need for sandblasting. Our Rust Grip paint
system is easy to apply and dries quickly, allowing for fast turn-around times.

Why is lead dangerous?
‍
Lead is a toxic metal that can cause serious health problems, particularly in children and
pregnant women. Exposure to lead can cause damage to the brain and nervous system,
resulting in developmental delays and learning difficulties. Lead can also cause anemia, kidney
damage, and reproductive problems.

Why is asbestos dangerous?
‍
Asbestos is a fibrous mineral that was commonly used in construction materials until the 1980s.
When asbestos fibers are inhaled, they can cause serious health issues, including lung cancer,
mesothelioma, and asbestosis. These conditions can take years to develop and often have a
poor prognosis.
‍

RUST GRIP® encapsulates lead-based paint, asbestos, or hazardous materials

Rust Grip® is a high-performance coating that can encapsulate lead-based paint, asbestos, or
other hazardous materials. It forms a tight seal that prevents fibers from escaping into the air,
protecting both workers and building occupants. Rust Grip® is easy to apply and can be used
on a variety of surfaces, including metal, concrete, and wood.

Lead-based paint
‍
Lead-based paint was commonly used in homes and buildings until the 1970s. When lead-
based paint deteriorates, it can release lead dust into the air, which can be harmful if inhaled.
Encapsulation is a safe and effective method for sealing lead-based paint, preventing it from
releasing hazardous fibers. Rust Grip® can be used to encapsulate lead-based paint on a
variety of surfaces, including walls, ceilings, and floors. Rust Grip® is the only coating which
can be applied to rusted lead paint.

Rust Grip® - The Ultimate for Encapsulation

Rust Grip® is the ultimate solution for encapsulating hazardous materials, including lead-based
paint and asbestos. It forms a permanent seal that protects workers and building occupants from the harmful effects of these materials. Rust Grip® is easy to apply, dries quickly, and can be used on a variety of surfaces. If you're looking for a safe and effective method for encapsulating hazardous materials, Rust Grip® is the solution you've been looking for.
‍