Enamo Grip
Aliphatic Polyurethane Enamel
Uniquely hard and durable coating film
Before
After
Enamo Grip Advantages
- Industrial Strength – Two Part Polyurethane
- Unlimited Colors – Available in Any Color
- Abrasion Resistant – Tough as Nails
- Easy To Apply – Brush, Roll or Spray
- Sheens – Gloss, Semi-Gloss, Satin or Flat
- Self-Leveling – Used as Floor or Wall coating
- Indefinite Submersion – Can be Used Underwater
- Longevity – Superior Gloss/Color Retention
Enamo Grip Advantages
- Industrial Strength – Two Part Polyurethane
- Unlimited Colors – Available in Any Color
- Abrasion Resistant – Tough as Nails
- Easy To Apply – Brush, Roll or Spray
- Sheens – Gloss, Semi-Gloss, Satin or Flat
- Self-Leveling – Used as Floor or Wall coating
- Indefinite Submersion – Can be Used Underwater
- Longevity – Superior Gloss/Color Retention
Case Studies
Case Studies
Simmons Army Airfield, Ft. Bragg
Rust Grip is the primer applied over lead paint, then topcoat with Enamo Grip in desert tan color
Blue Chip Casino Boat, Boyd Gaming
Michigan City USA
Enamo Grip in Multiple Colors for Long Lasting UV Protection
Offshore Drill Pipe Risers, Nigeria
Rust Grip, Moist Metal Grip, Enamo Grip Coating System
Qatar Navigation - Metal Work Boats - Doha, Qatar
3 coats applied in a single day to save time & money
Simmons Army Airfield, Ft. Bragg
Rust Grip is the primer applied over lead paint, then topcoat with Enamo Grip in desert tan color
Blue Chip Casino Boat, Boyd Gaming
Michigan City USA
Enamo Grip in Multiple Colors for Long Lasting UV Protection
Offshore Drill Pipe Risers, Nigeria
Rust Grip, Moist Metal Grip, Enamo Grip Coating System
Qatar Navigation - Metal Work Boats - Doha, Qatar
3 coats applied in a single day to save time & money
Lab Testing
ASTM D4060 - Taber Abrasion Testing
Very High Abrasion Resistance
ASTM E84 - Surface Burning Characteristics
Conclusions: Based on one test, the flame spread calculated according to ASTM E-84, meets Class A - 25 or under flame spread
Test Results
ASTM E96 - Water Vapor Transmission Rate
ASTM D 6904
Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied to Masonry
Enamo Grip, exhibited a 0.16 lb weight gain and no visible dampness on the uncoated side, when tested in accordance with ASTM D 6904
The submitted coating conforms to the requirements of the superseded Federal Specification TT-C-555B, as tested.
ASTM D 7088
Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
Sample of ENAMO Grip does not exhibit any water droplets or blistering when tested in accordance with procedures outlined in ASTM D 7088.
ASTM D5894 - Blistering and Rusting Evaluation
5000 Hours of Exposure in Ultraviolet and Salt-Spray Chambers
Three coupons coated with Rust Grip plus Enamo Grip coating were tested according to ASTM D5894 for 5000 hours of exposure. The average dry film thickness of the coating on the coupon was 14 mils.
The coating system shows no signs of blistering after 5000 hours of exposure. Some blistering is noted on the edges of the two coupons; however this is deit to the edge effect and not due to the deficiency in the coating. The UV radiation causes discoloration of the coating but does not affect its corrosion resistance characteristics.
The coating system does not show any sign of rusting after 5000 hours of testing. Therefore, it is concluded that the coating has excellent corrosion resistance characteristics with a rating of 10 as per ASTM D610.
Lab Testing
ASTM D4060 - Taber Abrasion Testing
Very High Abrasion Resistance
ASTM E84 - Surface Burning Characteristics
Conclusions: Based on one test, the flame spread calculated according to ASTM E-84, meets Class A - 25 or under flame spread
Test Results
ASTM E96 - Water Vapor Transmission Rate
ASTM D 6904
Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied to Masonry
Enamo Grip, exhibited a 0.16 lb weight gain and no visible dampness on the uncoated side, when tested in accordance with ASTM D 6904
The submitted coating conforms to the requirements of the superseded Federal Specification TT-C-555B, as tested.
ASTM D 7088
Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
Sample of ENAMO Grip does not exhibit any water droplets or blistering when tested in accordance with procedures outlined in ASTM D 7088.
ASTM D5894 - Blistering and Rusting Evaluation
5000 Hours of Exposure in Ultraviolet and Salt-Spray Chambers
Three coupons coated with Rust Grip plus Enamo Grip coating were tested according to ASTM D5894 for 5000 hours of exposure. The average dry film thickness of the coating on the coupon was 14 mils.
The coating system shows no signs of blistering after 5000 hours of exposure. Some blistering is noted on the edges of the two coupons; however this is deit to the edge effect and not due to the deficiency in the coating. The UV radiation causes discoloration of the coating but does not affect its corrosion resistance characteristics.
The coating system does not show any sign of rusting after 5000 hours of testing. Therefore, it is concluded that the coating has excellent corrosion resistance characteristics with a rating of 10 as per ASTM D610.
Before
After
Certifications
Made in USA
Technical Data
Description
Enamo Grip is a two part aliphatic polyurethane enamel available in clear and multiple colors. It forms a uniquely hard and durable coating film, which demonstrates unsurpassed semi gloss and color retention. It is resistant to UV, water, humidity, stains, acids, solvents
and chemicals.
Application
Enamo Grip can be applied to metal, concrete, masonry, wood and other porous surfaces. Application is by brush/roller or airless sprayer.
Physical Data
- Reacted Solids: White - By weight: 64% / By volume: 49%
- Reacted Solids: Clear - By weight: 44% / By volume: 39%
- Average Perms: 0.6809
- Cures by chemical reaction
- Aliphatic Polyurethane
- Max Surface Temp. when applying 150°F (65°C)
- Maximum Surface Temp. after curing 300°F (149°C)
- Shelf life: up to three years (unopened) under appropriate
storage conditions
Technical Data
Description
Enamo Grip is a two part aliphatic polyurethane enamel available in clear and multiple colors. It forms a uniquely hard and durable coating film, which demonstrates unsurpassed semi gloss and color retention. It is resistant to UV, water, humidity, stains, acids, solvents
and chemicals.
Application
Enamo Grip can be applied to metal, concrete, masonry, wood and other porous surfaces. Application is by brush/roller or airless sprayer.
Physical Data
- Reacted Solids: White - By weight: 64% / By volume: 49%
- Reacted Solids: Clear - By weight: 44% / By volume: 39%
- Average Perms: 0.6809
- Cures by chemical reaction
- Aliphatic Polyurethane
- Max Surface Temp. when applying 150°F (65°C)
- Maximum Surface Temp. after curing 300°F (149°C)
- Shelf life: up to three years (unopened) under appropriate
storage conditions
Purchase Enamo Grip
Or Request Information
Enamo Grip Spread Rate Calculator
1 coat @ 4 mils DFT
Lab Testing
ASTM D4060 - Taber Abrasion Testing
Very High Abrasion Resistance
ASTM E84 - Surface Burning Characteristics
Conclusions: Based on one test, the flame spread calculated according to ASTM E-84, meets Class A - 25 or under flame spread
Test Results
ASTM E96 - Water Vapor Transmission Rate
ASTM D 6904
Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied to Masonry
Enamo Grip, exhibited a 0.16 lb weight gain and no visible dampness on the uncoated side, when tested in accordance with ASTM D 6904
The submitted coating conforms to the requirements of the superseded Federal Specification TT-C-555B, as tested.
ASTM D 7088
Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
Sample of ENAMO Grip does not exhibit any water droplets or blistering when tested in accordance with procedures outlined in ASTM D 7088.
ASTM D5894 - Blistering and Rusting Evaluation
5000 Hours of Exposure in Ultraviolet and Salt-Spray Chambers
Three coupons coated with Rust Grip plus Enamo Grip coating were tested according to ASTM D5894 for 5000 hours of exposure. The average dry film thickness of the coating on the coupon was 14 mils.
The coating system shows no signs of blistering after 5000 hours of exposure. Some blistering is noted on the edges of the two coupons; however this is deit to the edge effect and not due to the deficiency in the coating. The UV radiation causes discoloration of the coating but does not affect its corrosion resistance characteristics.
The coating system does not show any sign of rusting after 5000 hours of testing. Therefore, it is concluded that the coating has excellent corrosion resistance characteristics with a rating of 10 as per ASTM D610.
Listing of acid compounds that ENAMOGRIP is resistant to. Solutions to amaximum of 15%
- Acetone
- Acetonitrile
- Acetylene, gas
- Acropol
- Aircraft gasoline
- Airturbo fuel
- Alcohol, linear primary C12-C-15
- Alcohol ethoxylate, linear primary
- Alcohol ethoxylate, ammonium salt solution
- Alcohol ethoxysulfate, sodium salt solution
- Alkane
- Alkyl benzene
- Alkylate bottom
- Alkylate detergent
- Alkylate 22
- Alkylate 130
- Allyl Alcohol
- Alpha olefins
- Alpha olefin C-6/7
- Alpha olefin C-7/8
- Alpha olefin C7/14
- Alpha olefin C-10/15
- Alpha-hydroxytoluol (Benezyl alcohol)
- Alpha-N-amylene
- Amyl carbinol
- Amylene
- Amylene hydrate
- Amyl hydride
- Anivax SX 3158
- Antifreeze
- Aromatic 100
- Asphalt cut back
- Aviation alkylates
- Aviation gasoline
- Aviation kerosene
- Benzene
- Benzol
- Benzyl alcohol
- Blandol
- Bunker oil
- Butyl alcohol
- Calcium alkyl salicylate
- Carbon dioxide (gas) 100%
- Carbonic acid
- Acetone
- Certrex's mineral spirits
- Circo light oil
- Citric acid
- Coal tar benzene
- Cottonseed oil stearine
- Cycloheptane
- Decyl alcohol
- Detergent alkylate
- Diesel fuel
- Diethylbenzene
- Diethylene glycol
- Dipropyl ketone
- Dodecyl alcohol
- Engine oil
- Ethoxol
- Ethylene glycol methyl ether
- Extender process oils
- Fuel, jet JP4
- Fusel oil, aice free
- Glycol
- Heptane
- Hexyl alcohol
- Isooctane
- Isopropyl ether
- Kerosene
- Methanol
- Methylbenzene
- Mineral spirits
- Naphtha, gasplant
- Octane (iso and normal)
- Olefin mixture (C5-C7)
- Polyethylene glycol
- Sodium chloride
- Stoddard solvent
- Toluene, industrial
- Toluol (Toluene)
Additional
- Potassium Hydroxide
- Sodium Hydroxide
- Sulfuric Acid
- Nitric Acid
- Acetic Acid
- Certrex's mineral spirits
Enamo Grip 5000 formula - Saturated Polyester with Urethane Backbone
Outstanding Alkali Resistance & Very Good Acid Resistance for Secondary Containment Topcoat. For PH between 5-14
