Rust Grip
Galvanized Roof Coating
Paint On Rust Without Losing Performance
Before
After
Rust Grip Advantages
- Single Component – No mixing part A & B
- Fast Cure – Humidity Accelerates Curing
- Surface Tolerant – Minimal Surface Preparation
- Easy To Apply – Brush, Roll or Spray
- Strength – Made with Aluminum
- Self-Priming – Primer, Mid & Top Coat All In One
- Long Shelf and Pot Life – 3 Years If Unopened
Case Studies
Chevron USA
Published in The Society of Petroleum Engineers
Chevron - Published in The Society of Petroleum Engineers
Rust Grip declared the best exterior drill pipe coating
after 8 years of testing
Rust Grip declared the best exterior drill pipe coating after 8 years of testing
Blue Chip Casino Boat – Boyd Gaming – Michigan City USA
Blue Chip Casino Boat
Boyd Gaming – Michigan City USA
Saved $2,000,000 by using Rust Grip instead of sand blasting
Kentucky Bridge Application
22 year Re-Inspection/Observation Report
Lab Testing
ASTM B117 – Salt Spray Test @ 6 mils DFT
15,000 hours - Perfect 10 out of 10
ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT
10,000 hours - Perfect 10 out of 10
Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.
Before
After
US PATENT 5,695,812
Certifications
Made in USA
Technical Data
Description
RUST GRIP is a tough, single component moisture cure polyurethane coating, loaded with metallic pigments for additional strength. In most cases, a white or near white blasting is not required. RUST GRIP is designed to resist chemical solvents and acid splashes; it can be used as a primer or a one coating system.
Application
RUST GRIP can be applied to metal, concrete, masonry and wood. Application can be by airless sprayer or brush/roller. Application thickness depends on surface profile.
Physical Data
- Solids: By Weight 62.2% / By Volume 51.4%
- Cures by absorbing moisture from in the air
- Weight: 9.4 lbs per gallon
- Shelf life: 3 years if unopened under normal conditions
- Resistant to most solvents, chemicals, and some acids
- VOC Level: 380 grams/liter
- Max. Surface Temp. when applying: 150°F
- Min. Surface Temp. when applying 50°F
- Max. Surface Temp. after curing: 325°F
Purchase Rust Grip
Or Request Information
Rust Grip Spread Rate Calculator
ASTM B117 – Salt Spray Test @ 6 mils DFT
15,000 hours - Perfect 10 out of 10
ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT
10,000 hours - Perfect 10 out of 10
Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.