Rust Grip

Marine Metal Paint

Rust Grip Advantages

  • Single Component – No mixing part A & B
  • Fast Cure – Humidity Accelerates Curing
  • Surface Tolerant – Minimal Surface Preparation
  • Easy To Apply – Brush, Roll or Spray
  • Strength – Made with Aluminum
  • Self-Priming – Primer, Mid & Top Coat All In One
  • Long Shelf and Pot Life – 3 Years If Unopened

Case Studies



Blue Chip Casino Boat
Boyd Gaming – Michigan City USA




Blue Chip Casino Boat – Boyd Gaming – Michigan City USA

Saved $2,000,000 by using Rust Grip instead of sand blasting

Qatar Navigation - Metal Work Boats - Doha, Qatar

3 coats applied in a single day to save time & money

Qatar Navigation - 2 Year Update - Doha, Qatar

3 coats of Rust Grip applied in the same day

Lab Testing

ASTM B117 – Salt Spray Test @ 6 mils DFT

15,000 hours - Perfect 10 out of 10

  • rust grip
  • rust grip
ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT

10,000 hours - Perfect 10 out of 10

Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.

Table 1. Ratings of the Coupons After
1,000, 5,000, and 10,000 Hours of Exposure

Exposure Time (Hours)

Rating of the Three Coupons as Per ASTM D610-08

Notes

1,000 10, 10, and 10 Up to 0.03 percent rusting on the coupons with rust grade 9-P, and up to 0.01 percent rusting on the coupons with rust grade 10
5,000 9-P, 10, and 10
10,000 9-P, 10, and 10
US PATENT 5,695,812
Certifications
Made in USA

Technical Data

Description

RUST GRIP is a tough, single component moisture cure polyurethane coating, loaded with metallic pigments for additional strength. In most cases, a white or near white blasting is not required. RUST GRIP is designed to resist chemical solvents and acid splashes; it can be used as a primer or a one coating system.

Application

RUST GRIP can be applied to metal, concrete, masonry and wood. Application can be by airless sprayer or brush/roller. Application thickness depends on surface profile.

Physical Data
  • Solids: By Weight 62.2% / By Volume 51.4%
  • Cures by absorbing moisture from in the air
  • Weight: 9.4 lbs per gallon
  • Shelf life: 3 years if unopened under normal conditions
  • Resistant to most solvents, chemicals, and some acids
  • VOC Level: 380 grams/liter
  • Max. Surface Temp. when applying: 150°F
  • Min. Surface Temp. when applying 50°F
  • Max. Surface Temp. after curing: 325°F
Purchase Rust Grip
Or Request Information
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Fast Overcoat Window Time
Relative Humidity
90°F
70°F
50°F
90% 1 hr 1.5 hr 2-3 hr
80% 1 hr 1.5 hr 2-3 hr
60% 1.5 hr 1.5-2 hr 3-4 hr
40% 1-2 hr 2-4 hr 6-8 hr
30% 2-3 hr 3-6 hr 10-14 hr
20% 6 hr 8-10 hr 12-16 hr
10% 12 hr 12-18 hr 18-24 hr
Rust Grip Spread Rate Calculator
Total Surface Area: 0
Rust Grip Gallon Needed: 0
Spread Rate per Gallon: 90 ft
(Includes 10% waste and spillage)
Total Surface Area: 0
Rust Grip Gallon Needed: 0
Spread Rate per Gallon: 61.2 ft
(Includes 10% waste and spillage)
ASTM B117 – Salt Spray Test @ 6 mils DFT

15,000 hours - Perfect 10 out of 10

  • rust grip
  • rust grip
ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT

10,000 hours - Perfect 10 out of 10

Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.

Table 1. Ratings of the Coupons After
1,000, 5,000, and 10,000 Hours of Exposure

Exposure Time (Hours)

Rating of the Three Coupons as Per ASTM D610-08

Notes

1,000 10, 10, and 10 Up to 0.03 percent rusting on the coupons with rust grade 9-P, and up to 0.01 percent rusting on the coupons with rust grade 10
5,000 9-P, 10, and 10
10,000 9-P, 10, and 10

ISO 12944-9 test by Petrobras

"Among the 3 tested zinc-free single component paint systems, the RUST GRIP showed the best performance"

1,813 PSI

(12.5 Mpa)

Initial Pull

1,638 PSI

(11.3 Mpa)

After 12 Cycles

Letters of Recommendation

"After meeting your company at the Off Shore Arabia Conference in April 2010, we decided to use Rust Grip on the deck of our ABS Class vessel Mubarak Challenger. It has now been over a year, and there are still no signs of corrosion development as originally promised by your company."

Mubarak Marine - Metal Work Boats - Dubai, UAE - Technical Department

"I try to rustgrip every piece of steel I can, because it really helps us save time and money on maintenance. Once I rustgrip something I do not have to worry about it again. We love your product and we are always trying to make our job easier, and this is one less thing we have to worry about once it is on. The pictures with the rusted, pitted rams are from 2019, where we took them off the aframe, removed the rust, applied the rustgrip and painted them with a one part polyurethane paint."

Louisiana Wild Life and Fisheries - Jeff Canulette

"I was using it on Al Mafyar LNG Carrier for last few years and it shows excellent performance on hard to maintain areas."

Nakilat - LNG Carriers - Qatar - Capt. Marin Telak

"Its been a year since the application of special coating of  1st & 2nd Coat: (Spray) Rust Grip & 3rd Coat (spray) Enamo Grip , the overall results of protection against environmental corrosion by the coatings is very good."

Qatar Navigation - Metal Work Boats - Doha, Qatar - Capt. Frazier Pinto

ABS Certificate

Awards

Hoover Dam Bridge (2011)
Hoover Dam Bridge (after 11 years)

Project Pictures

Satisfied Clients

volta coatings
Purchase Rust Grip
Or Request Information
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.