Rust Grip

Waterproofing

Before
After

TAP TO CALL +818 696 3786

Rust Grip Advantages

Single Component – No mixing part A & B
Fast Cure – Humidity Accelerates Curing
Surface Tolerant – Minimal Surface Preparation
Easy To Apply – Brush, Roll or Spray
Strength – Made with Aluminum
Self-Priming – Primer, Mid & Top Coat All In One
Long Shelf and Pot Life – 3 Years If Unopened

Case Studies

Chevron USA
Published in The Society of Petroleum Engineers

Chevron - Published in The Society of Petroleum Engineers

Rust Grip declared the best exterior drill pipe coating
after 8 years of testing

Rust Grip declared the best exterior drill pipe coating after 8 years of testing

Blue Chip Casino Boat – Boyd Gaming – Michigan City USA

Blue Chip Casino Boat
Boyd Gaming – Michigan City USA

Saved $2,000,000 by using Rust Grip instead of sand blasting

Kentucky Bridge Application

22 year Re-Inspection/Observation Report

Lab Testing

ASTM B117 – Salt Spray Test @ 6 mils DFT

15,000 hours - Perfect 10 out of 10

ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT

10,000 hours - Perfect 10 out of 10
‍
Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.

Table 1. Ratings of the Coupons After 1,000, 5,000, and 10,000 Hours of Exposure
Exposure Time (Hours)	Rating of the Three Coupons as Per ASTM D610-08	Notes
1,000	10, 10, and 10	Up to 0.03 percent rusting on the coupons with rust grade 9-P, and up to 0.01 percent rusting on the coupons with rust grade 10
5,000	9-P, 10, and 10
10,000	9-P, 10, and 10

TAP TO CALL +818 696 3786

Before
After

US PATENT 5,695,812

Certifications

Made in USA

Technical Data

Description

RUST GRIP is a tough, single component moisture cure polyurethane coating, loaded with metallic pigments for additional strength. In most cases, a white or near white blasting is not required. RUST GRIP is designed to resist chemical solvents and acid splashes; it can be used as a primer or a one coating system.

Application

RUST GRIP can be applied to metal, concrete, masonry and wood. Application can be by airless sprayer or brush/roller. Application thickness depends on surface profile.

Physical Data

Solids: By Weight 62.2% / By Volume 51.4%
Cures by absorbing moisture from in the air
Weight: 9.4 lbs per gallon
Shelf life: 3 years if unopened under normal conditions
Resistant to most solvents, chemicals, and some acids
VOC Level: 380 grams/liter
Max. Surface Temp. when applying: 150°F
Min. Surface Temp. when applying 50°F
Max. Surface Temp. after curing: 325°F

Purchase Rust Grip
Or Request Information

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Fast Overcoat Window Time
Relative Humidity	90°F	70°F	50°F
90%	1 hr	1.5 hr	2-3 hr
80%	1 hr	1.5 hr	2-3 hr
60%	1.5 hr	1.5-2 hr	3-4 hr
40%	1-2 hr	2-4 hr	6-8 hr
30%	2-3 hr	3-6 hr	10-14 hr
20%	6 hr	8-10 hr	12-16 hr
10%	12 hr	12-18 hr	18-24 hr

Rust Grip Spread Rate Calculator

Surface Area

Total Surface Area:	0
Rust Grip Gallon Needed:	0
Spread Rate per Gallon:	90 ft
(Includes 10% waste and spillage)

Surface Area

Total Surface Area:	0
Rust Grip Gallon Needed:	0
Spread Rate per Gallon:	61.2 ft
(Includes 10% waste and spillage)

ASTM B117 – Salt Spray Test @ 6 mils DFT

15,000 hours - Perfect 10 out of 10

ASTM D5894 – Cyclic Salt Fog Test @ 6 mils DFT

10,000 hours - Perfect 10 out of 10
‍
Some blistering is noted on the edges of the two coupons, however, this is due to the edge effect and not due to a deficiency in the coating.

Table 1. Ratings of the Coupons After 1,000, 5,000, and 10,000 Hours of Exposure
Exposure Time (Hours)	Rating of the Three Coupons as Per ASTM D610-08	Notes
1,000	10, 10, and 10	Up to 0.03 percent rusting on the coupons with rust grade 9-P, and up to 0.01 percent rusting on the coupons with rust grade 10
5,000	9-P, 10, and 10
10,000	9-P, 10, and 10

Waterproofing: Solutions for Harsh Environments

Waterproofing is an essential aspect of protecting any structure from the harsh elements of
nature. At Volta Coatings, we offer a range of high-performance protective coatings that are
specifically designed to provide effective waterproofing for a variety of substrates.
‍
Our products are suitable for use in a wide range of environments, including the harshest
climates, where protection against moisture and humidity is critical.

Moist Metal Grip

Moist Metal Grip is a two-component epoxy coating that provides excellent protection against
harsh environments. It is designed to produce hard, yet flexible coating films that offer
outstanding resistance to chemicals, solvents, water, and humidity. Our Moist Metal Grip
products are suitable for a range of substrates, including carbon steel, wood, and concrete.
They are also ideal for use in direct-to-metal (DTM) applications, thanks to their non-toxic, rust-
inhibitive pigments.

The ideal protection in a harshest environment

Our Moist Metal Grip coatings are specifically formulated to provide the ideal protection in the
harshest environment. They are tough adherents that offer exceptional chemical and solvent
resistance, making them suitable for use in a variety of harsh atmospheres. Additionally, these
coatings provide excellent water and humidity resistance, ensuring that the structures they
protect remain free from moisture damage for extended periods.

Rust Grip®

Rust Grip® is a one-part polyurethane coating that is designed for rust prevention and
protection. It is a high-performance coating that provides superior adhesion, flexibility, and
abrasion/impact-resistance. Our Rust Grip® products are resistant to chemical solvents and
acid splash, making them ideal for use in harsh environments. Rust Grip has also passed over
ISO 12944-6 C5H testing, indicating their exceptional durability and corrosion resistance.

The ultimate rust prevention and protection
‍
Rust Grip® is the ultimate solution for rust prevention and protection. Our one-part polyurethane
coatings are designed to cure upon contact with atmospheric moisture, providing a protective
coating of superior adhesion, flexibility, and abrasion/impact resistance. They are suitable for
use on a range of substrates, including metal, wood, concrete, and fiberglass, and are designed
for the encapsulation of tightly-bonded surfaces of lead-based and other toxic paints, as well as
rusted surfaces.

Super Base

Super Base is a water-based, high-performance elastomeric acrylic coating that is designed to
provide the ideal base coat for all-around performance. It is formulated from the best-known
high-performance acrylic in the market and is known for its excellent adhesion, ability to pond
water, weatherability, UV resistance, flexibility, and toughness. Our Super Base products are
specifically blended to work cohesively with our MULTI-MESH MEMBRANE and Super Therm®
top coat to form a complete seal on any roofing or wall structure.

The ideal base coat for all-round performance

Our Super Base coatings are designed to provide the ideal base coat for all-around
performance. They are highly flexible and tough, making them suitable for use in a variety of
environments. They offer good adhesion, ability to pond water, weatherability, and UV
resistance, ensuring that the structures they protect remain free from damage for extended
periods. Additionally, these coatings are water-based, making them easy to apply without
environmental concerns, further enhancing their appeal as an ideal base coat for all-around
performance.
‍
In summary, whether you are looking to protect your home or commercial property, Super Base
is an ideal base coat for all-around performance. Its durability and long-lasting performance
make it an excellent investment for anyone looking for reliable waterproofing solutions.