Get heat protection that surpasses conventional insulation with HSC™ Coating. HSC™ Coating is a ceramic based, water-borne insulation coating designed to insulate and control conductive heat transfer on surface temperatures up to 350°F.
HSC™ offers a “green”, non-flammable, non-toxic formula that can be used for applications requiring smooth surfaces over small diameters. It can be applied over metal, concrete, masonry, wood, and other substrates. HSC™ is an ideal thermal coating for hot surfaces with irregular shapes such as elbows, joints, valves, tanks, or in tight spaces that are difficult to reach.
HOT SURFACE COATING is a ceramic based, water-borne insulator designed to insulate in medium temperature situations. HOT SURFACE COATING can be used as a base coat/primer or it can be built up layers for additional protection. HOT SURFACE COATING is specifically engineered to control hot surface temperatures up to 350°F .
- Easy Application – airless spray, brush, roll
- Weatherability – no topcoat required
- Longevity – does not absorb moisture
- Esthetics – Lightweight and smooth in appearance
- Superior Insulation – 0.07 W/mK
- Cold Insulation – Condensation Control
- Corrosion Protection – Helps control CUI (Corrosion Under Insulation)
- Safe – Water based and USDA approved for food contact
For Technical, Application & SDS files please click below.
HSC-Coating-Product-Documents-06-26-20
HOT SURFACE COATING (HSC) insulation method is much different than the traditional “wrap” insulation materials which merely slow down the loss of heat (known as an R rating or “heat transfer”). The seven ceramic compounds in HSC™ create a barrier to catch and hold heat on the surface of the unit; whether a pipe, furnace surface, boiler, etc. While HPC is designed for high heat, HSC is designed for medium heat up to 350°F .
Unlike conventional wraps that use air as the insulation component, the ceramic compounds in HSC™ Coating resist absorbing heat radiating from the surface. This traps and holds the heat onto the surface for more effective insulation performance.
HOT SURFACE COATING is a water-borne system using a special acrylic blend with specific ceramic compounds to provide the non-conductive block against heat transfer without depending upon reflectivity. The coating will dry down on a cold surface by evaporation and can be aided in the dry down by adding heat to the environment. If the surface is already heated, the dry-down process will take care of itself without additional steps required.
